Cleanmaxx KPA12 Mode D'emploi page 22

EN
Do not suck up any liquids and do not pour any liquids into the
■
dust container in order to prevent damage to the motor and the
fi lters.
Only use accessories which are recommended by the manufac-
■
turer.
Make sure that you do not suck up any large, bulky objects with
■
the device. They may become jammed and block the fl ow of air
in the tube or pipe; they must therefore be removed.
Never leave the device unattended when it is switched on or
■
connected to the mains.
The device must be switched off when inserting or removing the
■
mains plug.
Switch the device off immediately and pull the mains plug from
■
the mains socket
– if you stop working with the device for a period of time,
– if you are no longer using the device,
– before you change the nozzles,
– if a fault or error occurs while the device is in operation,
– if liquids or foreign bodies have found their way into the device,
– before a thunderstorm,
– before you clean parts of the device and accessories.
Always pull on the plug and never the cable to pull the mains
■
plug out of the mains socket!
Never pull the device by the cable to move it. Use the handle.
■
Do not try to lubricate the rollers with lubricant or oil. This would
■
cause dust and dirt to increasingly adhere to the rollers.
Empty the dust container regularly to prevent overloading of the
■
motor.
Clean the fi lters regularly to prevent overloading of the motor.
■
Under no circumstances should you clean the HEPA fi lter with
■
water! You should only ever use a brush or a dry cloth.
The dust container and the foam fi lters must be completely dry
■
before you insert them again and use or store away the device.
Store the device in a dry place that is not accessible to children
■
and animals when it is not being used.
22