Important Safety - Prowork PBK 35 Mode D'emploi

Anleitung PBK 35 SPK 1 05.07.2004

IMPORTANT SAFETY

Your Talon Chain Saw is provided with a safety label
located on the chain brake lever/hand guard. This label,
along with the safety instructions on these pages, should
be carefully read before attempting to operate this unit.
• HOW TO READ SYMBOLS AND COLORS (FIG. 1)
WARNING: RED Used to warn that an
unsafe procedure should not be performed.
GREEN RECOMMENDED
Recommended cutting procedure.
WARNING
1. Beware of kick back.
1
3
2. Do not attempt to hold saw
with one hand.
3. Avoid bar nose contact.
4
2
RECOMMENDED
4. Hold Saw properly with both
Fig. 1
hands.
• DANGER! BEWARE OF KICKBACK!
WARNING: Kickback can lead to dangerous
loss of control of the chain saw and result in
serious or fatal injury to the saw operator or to
anyone standing close by. Always be alert.
Rotational kickback and pinch-kickback are
major chain saw operational dangers and the
leading cause of most accidents.
Engine Displacement . . . . . . . . . . . . . . . . . . .
Maximum Shaft Brake Power . . . . . . . . . . . . . . . . .1.3 kW
Cutting Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14" (35cm)
Chain Pitch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10mm
Chain Gauge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.3mm
Idle Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2,800-3,300 min
Speed in Max power . . . . . . . . . . . . . . . . . . . . . . . .8,000 min
Fuel Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .296CC (10 oz)
Oil Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .180CC (6.1 oz)
Anti Vibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Y
Sprocket Tip Bar . . . . . . . . . . . . . . . . . . . . . . . . . . .9 Teeth
Chain Brake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Y
Clutch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Y
Automatic Chain Oiler . . . . . . . . . . . . . . . . . . . . . . .Y
Lower Kick Back Chain . . . . . . . . . . . . . . . . . . . . . .Y
Net Weight (Without guide bar and chain) . . . . . . . . . . . . . . . . . . . . . .5.1 kg
Net Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . .5.88 kg
Sound pressure level . . . . . . . . . . . . . . . . . . . .97.6 dB(A)
Sound power level . . . . . . . . . . . . . . . . . . . . . .103 dB(A)
Mean braking time at racing speed . . . . . . . .0.07s
Vibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10.2 m/s
Fuel Consumption . . . . . . . . . . . . . . . . . . . . . .1,5 kg/h
10:45 Uhr Seite 15
A
B
A A
Fig. 2A Fig. 2B
BEWARE OF:
ROTATIONAL KICKBACK THE PUSH
(Fig. 2A) (PINCH KICKBACK)
AND PULL REACTIONS
(Fig. 2B)
A = Kickback path A = Pull
B = Kickback reaction zone B = Solid objects
C = Push
KICKBACK may occur when the NOSE or TIP of the
guide bar touches an object, or when wood closes in and
pinches the saw chain in the cut.
Tip contact in some cases may cause a lightning-fast
reverse reaction, kicking the guide bar up and back
toward the operator.
PINCHING the saw chain along the BOTTOM of the
guide bar may PULL the saw forward away from the
operator. PINCHING the saw chain along the TOP of the
guide bar may PUSH the guide bar rapidly back toward
the operator.
Any of these reactions may cause you to lose control of
the saw, which could result in serious personal injury.
SPECIFICATIONS
35 cm 3 (2.3 cu-in)
-1
-1
2
GB
A
B
C
15