Care And Maintenance - Hama PP-245 Mode D'emploi

6.2. (Manual) settings
• Press and hold the UP button (16) and the DOWN button (17) for approx. 3 seconds
to stop the search for the DCF signal. The wireless icon (11) disappears and you can set
the time manually
• Press and hold the MODE button (14) for approx. 3 seconds to make the following
settings one after the other:
• Hours (2)
• Minutes (2)
• Year (2)
• Month (4)
• Day (3)
• To select individual values, press the UP button (16) or the DOWN button (17) and
con rm each selection by pressing the MODE button (14).
• While you are setting the minutes or seconds, press the °F/°C button (15) to switch
between the 12-hour (a.m./p.m.) and 24-hour formats.
• If you do not make an entry for 10 seconds, you automatically exit the setup mode.
• Press and hold the DOWN button (17) until the desired language for the week display
(5) appears.
Day of the week
Note –
You can choose from English (GB), French (FR), German (DE), Spanish (ES),
Dutch (DU) and Italian (IT) for the display of the day of the week.
6.3. Time zone
Time zone
Note –
• The DCF signal can be received over long distances, but always transmits
the current Central European Time in Germany. Make sure you account for
the time difference in countries with another time zone.
• If you are in Moscow, the time is 3 hours later than in Germany. This means that you
should set +3 for the time zone. The clock then automatically sets the time to 3 hours
after the DCF signal received or relative to the manually set time.
• Press and hold the UP button (16) for approx. 3 seconds to display the time in a different
time zone. The time zone icon (8) is displayed.
• Press and hold the MODE button (14) for approx. 3 seconds to set the required time
zone difference. The hours display (2) begins to ash.
• To select the time difference (+/- 12 hours), press the UP button (16) or the DOWN
button (17) and con rm each selection by pressing the MODE button (14).
• If you do not make an entry for 10 seconds, you automatically exit the setup mode.
• Press and hold the UP button (16) for approx. 3 seconds to return to the normal time
display
6.4. Celsius / Fahrenheit
• Press the °F/°C button (15) to choose between °C and °F for the temperature display.
6.5. Moon phases
The clock indicates the current moon phase (6) with the following icons.
Display (6) Moon phase
New moon
Waxing crescent
Waxing half moon
Waxing moon
Full moon
Waning moon
Waning half moon
Waning crescent
6.6. Low battery charge
When the battery icon (10) appears on the display, the battery charge is very low. Replace
the battery immediately.

7. Care and Maintenance

Only clean this product with a slightly moist, lint-free cloth, and do not use aggressive
cleaning agents. Make sure that water does not get into the product.
8. Warranty Disclaimer
Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting
from improper installation/mounting, improper use of the product or from failure to observe
the operating instructions and/or safety notes.
9. Technical Data
Power supply
Measuring range
Temperature
Radio-controlled DCF clock
Thermometer
10. Declaration of Conformity
Hereby, Hama GmbH & Co KG declares that the radio equipment type
[00186383, 00104936] is in compliance with Directive 2014/53/EU. The full
text of the EU declaration of conformity is available at the following internet
address: www.hama.com -> 00186383, 00104936 -> Downloads.
Frequency band(s)
PP-245 DCF wireless wall clock
1.5 V
1 AA battery
0°C – +50°C/ 32°F – 122°F
Yes
Yes
77.5 kHz
3