Connection Example 3. Av Amp - Pioneer DVL-V888 Mode D'emploi

Connection example 3.
AV amplifier
¶
Connect this player's audio output jacks to an amp's CD, LD, AUX or other audio input jacks. (Do not connect to PHONO jacks.)
¶
Connect this player's video output jack to the amplifier's or receiver's video input jack.
¶
When connecting to a digital output, refer to page 70.
When connecting to a component bearing the Pioneer Î mark.
¶
If you use a commercially available cord with mini plugs (no resistance) to connect this player's control input jack to the control
output jack of the component bearing the Î mark, you can control the player as though it were a component in a system
(system control).
¶
If you connect for system control, you cannot operate the player directly by pointing the remote control at it and pressing
buttons.
¶
When controlling the unit as part of a system, be sure to connect to the amplifier with audio cord even if you are using only
digital components.(System control is not possible if you connect using only cables with mini plugs.)
¶
If your AV amplifier is a Dolby Pro Logic decoder, you can enjoy surround sound.
¶
For more details, refer to the connected component's operating instructions.
Connect either
one of these.
V
Yellow
Supplied video cord
CONTROL
OUT
68
Connecting the Player
When connecting to a digital output, refer to page 70.
White
Red R L
VIDEO
IN
Yellow
V
AUDIO
IN
White
L
L
Supplied
R
R
audio cord
Red
S2
AV amplifier
IN
Cord with mini plugs (no resitance)
S video
cable
Note
indicates the use of separately sold cords.
By connecting to a regular AV
amp or stereo amp, you can
enjoy playback with improved
sound quality.