Av Connector Connection; System Control Connections - Pioneer DV-626D Mode D'emploi

AV CONNECTOR Connection

Using a commercially available 21-pin SCART cable,
connect the AV CONNECTOR jack on the player to a TV
or monitor to achieve audio and video with a single
connection.
• The video output signal of the AV CONNECTOR jack
contains composite video, S-video, and RGB
information. After making physical connections to your
TV or monitor, select the most appropriate video
format in the [Video Out] setting in the Setup screen
Video menu (page 30).
• SCART cables are available in a variety of
configurations. Before making connections, be sure to
check that the cable you are planning to use is
appropriate for the TV or monitor you are making
connections to.
• AV CONNECTOR pin signal descriptions can be found
in the 'Specifications' (page 67).
DV-626D
AV CONNECTOR
20
En
All manuals and user guides at all-guides.com
TV or monitor

System Control Connections

Using a commercially available cord with a mini plug
(3.5 mm dia. with no resistance) to connect this player's
CONTROL IN jack to the CONTROL OUT jack of another
PIONEER component bearing the Î mark, you can
control the player as though it were a component in a
system (system control).
• If you connect for system control, you cannot operate
the player directly. Point the remote control unit at the
component (AV amplifier, etc.) connected to the
CONTROL OUT jack to operate.
• When controlling as a system, be sure to make a
connection to the amplifier using an audio or video
cord, even when using only digital components.
• For details, refer to the operation manuals of the
connected components.
DV-626D
CONTROL
OUT IN
CONTROL
OUT
Pioneer component
with Î mark.