Changing Graphics Channel - Pioneer DVL-V888 Mode D'emploi

Changing Picture, Sound Quality and Graphics Settings

Changing graphics channel

During play, press
GRAPHICS.
GRAPHICS
ON OFF
2
Select ON with the
GRAPHICS
ON OFF
3
Press .
ENTER
GRAPHICS
SCROLL
CHANNEL
Scroll flashes.
4
Press .
ENTER
GRAPHICS
SCROLL
CHANNEL
Channel flashes.
MODE
and select
MELODY MODE CONDITION PROGRAM
GUIDE VOCAL
KEY CONTROL
VOCAL PARTNER
LASER DBC
buttons.
LAST PLAYBACK
MEMORY CONTROL
MENU
TITLE RETURN
ENTER
PREV NEXT
REV PAUSE PLAY FWD
LAST PLAYBACK
MEMORY CONTROL
MENU
TITLE RETURN
ENTER
PREV NEXT
REV PAUSE PLAY FWD
CHP/TIME STOP REPEAT REPEAT
A–B
CLEAR
5
Press .
ENTER
GRAPHICS
CHANNEL
00 01 02 03
04 05 06 07
08 09 10 11
12 13 14 15
Select a channel number with the
digit buttons.
GRAPHICS
00 01 02 03
04 05 06 07
08 09 10 11
12 13 14 15
¶ The selected channel number
is displayed in reverse.
¶ Pressing the same number
again switches it OFF.
¶ To select channel numbers 10
through 15, first press
then through .
Press .
ENTER
The selected channel's graphics
are displayed.
Note
If graphics are not displayed even if you perform these operations,
try changing the display position (refer to page 46).
Tips
¶ If the power to the player is cut, changed graphics scroll and
channel setting return to the initial settings. This is to prevent
problems such as no display of graphics occurring when a different
disc is played.
¶ To return to the previous display, press

Changing graphics channel

DISC SIDE
A / B
AUDIO SUBTITLE ANGLE DISPLAY
LAST PLAYBACK
MEMORY CONTROL
MENU
TITLE RETURN
ENTER
PREV NEXT
REV PAUSE PLAY FWD
CHP/TIME
REV PAUSE PLAY FWD
CHP/TIME
STOP REPEAT REPEAT
A–B
CLEAR
MELODY MODE CONDITION PROGRAM
GUIDE VOCAL
KEY CONTROL
VOCAL PARTNER
and
LAST PLAYBACK
MEMORY CONTROL
MENU
TITLE RETURN
ENTER
PREV NEXT
REV PAUSE PLAY FWD
CHP/TIME
STOP REPEAT REPEAT
A B
RETURN
on the remote control.
47