General Specifications - Amprobe AU92 Mode D'emploi

GENERAL SPECIFICATIONS

Display: 3¾ digit liquid crystal display (LCD) with a maximum reading of 3999.
Polarity: Automatic, positive implied, negative polarity indication.
Overrange: (OL) or (-OL) is displayed.
Zero: Automatic.
Low battery indication: The " " is displayed when the battery voltage drops below
the operating level.
Measurement rate: 2 times per second, nominal.
Auto power off: Approx. 10 minutes.
Operating environment: 0°C to 50°C at < 70% RH.
Storage temperature: -20°C to 60°C at < 80% RH.
Accuracy: Stated accuracy at 23°C ± 5°C, <75% RH.
Temperature Coefficient: 0.1 × (specified accuracy) per °C. (0°C to 18°C, 28°C to 50°C).
Altitude: 2000m, indoor operation
Power: Standard 9-volt battery, NEDA 1604, JIS 006P, IEC 6F22.
Battery life: 150 hours typical with carbon zinc.
Dimensions: 165 × 78 × 50 mm ( 6.5 x 3.1 x 1.9 in.)
Weight: Approx. 315g (11.1 oz). including holster.
Accessories: One pair test leads, temperature adapter, inductive pick-up probe,
type-K thermocouple, One spare fuse (0.5A/500V), 9V battery (installed) and users
manual.
Safety : Meets IEC61010-1 2 Ed., UL61010-1 2 Ed. CAT III-600 Volts AC & DC; Class II;
� nd nd
Pollution degree: 2; EN61010-2-032
EMC: Conforms to EN61326-1.
This product complies with requirements of the following European Community
Directives: 89/ 336/ EEC (Electromagnetic Compatibility) and 73/ 23/ EEC (Low Voltage)
as amended by 93/ 68/ EEC (CE Marking). However, electrical noise or intense
electromagnetic fields in the vicinity of the equipment may disturb the measurement
circuit. Measuring instruments will also respond to unwanted signals that may be
present within the measurement circuit. Users should exercise care and take appropriate
precautions to avoid misleading results when making measurements in the presence of
electronic interference.
11