Güde GC 130 WIG Traduction Du Mode D'emploi D'origine page 11

Prohibitions:
No pulling the cable!
Not for persons with artificial
pacemaker!
Warning:
Warning/Caution!
Warning against radioactive
materials and ionising
radiation!
Warning against risk of burn
as a result of high
temperatures.
Commands:
Please read the Operating
Instructions before any
servicing
Use safety gloves
Environment protection:
Dispose waste professionally
so as not harm the
environment.
Any defective and/or disposed
electric or electronic devices
must be delivered to
respective collection centres.
Package:
Protect against moisture
Fragile This side up
Not to be used when raining!
Warning against dangerous
voltage!
Warning against poison
gases!
Wear protective glasses
Packing cardboard material
may be delivered to
collecting centres for
recycling.
Interseroh-Recycling
Technical specifications:
Connection ~ frequency
Regulated area
Electrode thickness
Can be used in working
conditions with increased risk
of electric shock
WIG welding technology
Explanation of symbols:
EN 60974-1/A3:
2005
Serial No.
MMA
WIG
U
0
U
2
X
I
U
U1
I
1max
I
1eff
1~50/60Hz
I1
IP21S
S
11
Minimum protection
Recommended material
thickness
Weight
Single-phase alternating
current supply and rated
power symbol
Shielded metal arc welding
with wrapped bar electrode
European welding standard
Must be given for all questions
Wrapped electrode welding
WIG welding in protective
atmosphere
Idle voltage
Welding voltage
Relative time of activation.
Relation between the time of
loading/total working time. This
applies to the working time cycle of
10 minutes.
A relative time of activation of 60%
for example means that 6 minutes of
loading must be followed by 4
minutes of idle run.
Welding current
Secondary voltage with welding
current 12
Nominal input voltage (alternating
current; tolerance ± 10%)
Maximum nominal input current
Maximum effective input current
60Hz single-phase voltage 50 or 60
Hz
Absorbed current at corresponding
welding current 12. Divide the I1
value with 1.6 for power supply for
WIG welding.
Metal frame protection class
Suitable for works in high-risk areas