Peg-Perego VIAGGIO Notice D'emploi page 26

Instructions for use
UNIVERSAL CATEGORY - Belted
Group 0+
Fastening with seatbelts
IMPORTANT: For the correct use of the
"Viaggio 0+1 Switchable" car seat in Group 0+
mode, it is necessary to:
- Extract from under the seat the casing that enables
the car seat to be reclined.
To extract it, press the handle and pull it towards
you, extracting the base (arrows A and B).
- Use the lever (arrow C) to recline the seat to its
highest position.
-
-
IMPORTANT: Take hold of the seatbelt and pull
it firmly, so as to ensure that the "Viaggio 0+1
Switchable" fits as close as possible to the vehicle
seat (arrow D).
Instructions for use
UNIVERSAL CATEGORY - Belted
Group 1
Fastening with seatbelts
IMPORTANT: For the correct use of the "Viaggio 0+1
Switchable" car seat in Group 1 mode, it is necessary
to:
- Reposition the casing within the base of the car seat.
Press the lever and push inwards, as indicated in
the figure.
IMPORTANT: Take hold of the seatbelt and pull
it firmly upwards, so as to ensure that the "Viaggio
0+1 Switchable" fits as close as possible to the
vehicle seat (Fig. C).
How to secure your child in the
"Viaggio 0+1 Switchable" car seat