Peg-Perego VIAGGIO Notice D'emploi page 25

IMPORTANT
• "Viaggio 0+1 Switchable" must be installed in a
rear-facing position when used as a Group 0+ car
seat and in a forward-facing position when used as
a Group 1 car seat.
• Do not install "Viaggio 0+1 Switchable" on rear- or
sideways-facing vehicle seats.
• When used as a Group 0+ car seat on the vehicle's
front seat, the front airbag must be disabled.
• When used as a Group 1 car seat on the vehicle's
front seat, the car seat should be positioned as far
as possible from the dashboard.
• This item has a progressive serial number.
• If you experience any difficulty fitting "Viaggio
0+1 Switchable", lift up or remove the vehicle's
headrests.
WARNING
Read the instructions carefully before use and keep
them in the folder provided for future reference.
Failure to closely follow the car seat installation
instructions will put your child at risk.