Package Checklist - Kohler actro C-4 Mode D'emploi

Köhler Elektromotoren
Johannesstraße 14-16
70794 Filderstadt
Tel. +49-(0)711-700264-40 Fax +49-(0)711-700264-49
http://www.actro.de
Operating instructions for actro Motors
Congratulations for your acquisition of an actro. With this high performance brushless motor you have a long living and reliable prod-
uct you can enjoy - if you treat it properly.
Therefore we want to give you some hints you should carefully read before you use the actro the first time.
Properties of all actro
outside rotor
•
electronic sensorless commutation (brushless)
•
mechanically robust construction
•
thermally robust due to open design and rotating case
•
nearly wearless
•
very high torque and high efficiency
•
Properties of actro 12, 24, 32, 60
Rear-sided mounting by fiberglass flange, very simple for motor planes
•
Properties of actro Compact
both-ways drive, compatible to actro adapters
•
Properties of actro Compact and Heli
Front-sided mounting, very simple for gliders and helicopter models
•

Package checklist

• actro motor, for actro12-60 with mounted fiberglass-flange
• actro60 is equipped with propellor adapter
• Operating instruction
Don't try to run the actro holding it in your hands - danger of injury!
Drive the actro only mounted at a model or a special test environment.
Precautions
• Take care of correct arrangement of motor-connections
• All cables mustn't be stretched.
• Don't bring magnetically sensitive equipment too close to the motor.
• There should be no loose parts in the vincinity of the motor.
• actro has to have enough space to run without friction.
• Rotationg propellers are dangerous! Always stay behind the propeller-plane!
• Prior to first flight, test range of RC-control.
• Only use intact motor. If any anormal behaviour occurs, ship to inspection.
Köhler Elektromotoren GbR
The case is the rotating part of actro
actro - Betriebsanleitung/ operating instructions/ Mode d'emploi Seite/page 5