Scanning Tracks/Files (Scan); Repeating Individual Tracks/Files Or; Whole Directories (Repeat); Pausing Playback (Pause) - Blaupunkt Monte Carlo MP34 Notice D'emploi Et De Montage

MP3 MODE
To play all the tracks/files on the inserted
MP3-CD in random order,
➮
press button 5 MIX 9 longer than
2 seconds.
"MIX CD" appears in the display and the
MIX symbol lights up.
Cancelling MIX
To cancel MIX,
➮
briefly press button 5 MIX 9.
"MIX OFF" appears in the display and
the MIX symbol disappears.

Scanning tracks/files (SCAN)

You can briefly play all the tracks/files
on the CD.
➮
Press the MENU button 8 for
longer than 2 seconds.
"SCAN" appears alongside the blinking
track/file numbers during the scanning
process.
Note:
You can set the scanning time
G
(scantime). For further details on
setting the scantime, please read the
"Setting the scantime" section in the
"Radio mode" chapter.
Stopping SCAN and continuing
playback
➮
Briefly press the MENU button 8.
The currently scanned track/file will then
continue to be played normally.
Repeating individual track/file or

whole directories (REPEAT)

To play the current track/file repeatedly,
➮
briefly press button 4 RPT 9.
18
"RPT TRCK" appears briefly in the
display and RPT lights up.
To repeat the whole directory,
➮
press button 4 RPT 9 longer than
2 seconds.
"RPT DIR" appears briefly in the
display.
Cancelling REPEAT
To stop the current track or current
directory from being repeated,
➮
briefly press button 4 RPT 9.
"RPT OFF" appears briefly in the
display and the RPT symbol
disappears.

Pausing playback (PAUSE)

➮
Press button 3 E 9.
"PAUSE" appears in the display.
Cancelling pause
➮
Press button 3 E 9 while in
pause mode.
Playback is resumed.

Setting the display

Setting the standard display mode
While playing MP3 tracks/files, you can
choose to display one of the following
standard display modes:
Track/file number and playing time
G
Track/file number and clock time
G
Directoy number and track/file
G
number
Directoy number and clock time
G
Directoy number and playing time
G