Communication Ports; Rs232 And Usb Connectors; Communication Slot - Siel SAFEPOWER-EVO-HF 30 Manuel D'installation Et D'utilisation

C
OMMUNICATION PORTS
In the upper part of the UPS, behind the door (see "Views of the UPS") there are the following communication ports:
Serial port, available with RS232 connector and USB connector.
NOTE: the choice of one connector automatically excludes the other.
Expansion slots for additional COMMUNICATION SLOT interface boards
AS400 port
Moreover, on the rear of the UPS it is possible to install as an option the power relay board (4 programmable contacts, 250Vac,
3A)
RS232 USB
AND
PIN # NAME
1
2 TX
3 RX
4
5 GND
6
7
8 +15V
9 WKATX
C
OMMUNICATION
This UPS is equipped with two expansion slots for accessory communication boards, which allow the device to communicate
using the main communication standards (see the "Front views of the UPS" paragraph).
Here are some examples:
Second RS232 port
Serial duplicator
Ethernet agent with TCP/IP, HTTP and SNMP protocol
RS232 + RS485 port with JBUS / MODBUS protocol
For further information on the accessories available, please visit the website.
IV331 Rev.000 SIEL S.p.A.
Data di emissione: 2011-08-22
CONNECTORS
RS232 CONNECTOR
TYPE SIGNAL
IN
OUT TX serial line
IN RX serial line
POWER
OUT
Isolated power supply
POWER
15V±5% 80mA max
OUT ATX power supply wake-up
S
LOT
USB CONNECTOR
4 3
1 2
PIN # SIGNAL
1 VBUS
2 D-
3 D+
4 GND
Pag. 91 di 258 + FR