WARNING: Risk of injury!
• Children may not play with the appliance.
• Appliances can be used by persons with reduced physical, sen-
sory, or mental capabilities or lack of experience and / or knowl-
edge, if they are supervised or have been instructed concerning
safe use of the appliance and understand the hazards involved.
• Do not repair the appliance by yourself. Always contact an
authorized technician. If the supply cord is damaged, it must be
replaced by the manufacturer, its service agent or similarly quali-
fied persons in order to avoid a hazard.
CAUTION:
Do not immerse the appliance into water for cleaning. Follow the
instructions that we provide in the chapter "Cleaning".
• Do not manipulate any of the safety switches.
• Only process foodstuffs with this appliance. Misuse of the appli-
ance for other purposes may cause injury.
Unpacking the Appliance
1. Remove the packaging of the appliance.
2. Remove all packaging material such as plastic film, filler
material, cable ties and box packaging.
3. Check that all parts are in the box.
4. If the packaging content should be incomplete or if
damages should be noticeable, do not operate the appli-
ance. Return it to the distributor immediately.
NOTE:
Dust or production residues may still be found on the
appliance. We recommend that you clean the appliance
as described under "Cleaning".
Overview of the Components /
Scope of Delivery
1 Swivel arm
2 Motor housing
3 Lever for lowering / raising the arm
4 Push button (Pulse operation)
5 Control knob
6 Operation indicator lamp
36
KM3709_IM
7 Mixing bowl
8 Splash guard
9 Whisk
10 Kneading hook
11 Mixing hook
12 Protective disk
Electric Connection
Check that the mains voltage to be used matches the volt-
age of the appliance. Refer to the rating label for detailed
specifications.
Installation and Operation of the
Kneading Machine
NOTE:
Turn on the appliance with the mixing bowl in place only!
1. Opening the swivel arm: Swivel the lever in direction
and hold it in that position. Move the swivel arm by
hand to the top position and release the lever.
2. If you need the splash guard, attach it now to the swivel
arm from below. Hold the splash guard (8) in such a way
24.05.18