Sony SU-WL500 Mode D'emploi page 8

Step 4:
Preparing for the
installation of the TV
If you intend to install a TV that is not specified on page 2, be
sure to refer to its operating instructions, or the supplied
leaflet.
1
Remove the screws from the rear
of the TV. Then detach the Table-
Top Stand from the TV.
Place the TV with its screen facing down on a stable
cloth-covered work surface.
For the following TV users:
KDL-46/40D30xx *, KDL-46/40D28xx *,
KDL-46/40D27xx *, KDL-40D26xx *,
KDL-46/40T30xx *, KDL-40T28xx *,
KDL-40T26xx *, KDL-46/40S30xx *,
KDL-40S28xx *, KDL-40SL130,
KLV-46/40V300A
Soft cloth
8
(GB)
For the following TV users:
KDL-32D30xx *, KDL-32D28xx *,
KDL-32D27xx *, KDL-32D26xx *,
KDL-32T30xx *, KDL-32T28xx *,
KDL-32T26xx *, KDL-32S30xx *,
KDL-32S28xx *, KDL-32XBR4,
KDL-32SL130, KLV-32V300A
Soft cloth
* In the actual model names, the "xx" indicates
numbers and/or characters specific to each model.
Notes
• When removing the Table-Top Stand from the TV, lay the
display face down on a stable work surface that is larger
than the TV.
• To prevent damaging the surface of the LCD display, make
sure to place a soft cloth on the work surface.
CAUTION
• If pressure or shock is applied to the surface of the TV, the
LCD display may break or become damaged.
• Lay the display face down on a stable and level surface
with the Table-Top Stand hanging over the edge of the
surface. Having the display face and the base of the Table-
Top Stand on the same level surface will create an unstable
working condition and can damage the TV.
• When detaching the Table-Top Stand from the TV, hold the
Table-Top Stand securely with both hands.