gdw 1456 Instructions De Montage page 5

Jaguar X-Type Estate
03/2004 - ....
Ref. 1456
1) Disassemble the bumper in the rear and loosen the fixation rubbers.
2) Place the mounting pieces (g) and (h) against the inside of the chassis
so that the points (A) are matching with the provided drillings.
The points (B) of the mounting pieces are matching with the provided
drillings in the cross-plate of the body work.
Insert the bolts and the washers but do not tighten yet.
3) Place afterwards the tow bar so that the points (B) and (C) of the tow
bar are matching with those of the already mounted pieces.
Insert the bolts, washers and nuts and tighten everything firmly.
4) Make an incision in the bumper as on sketch enclosed and re-assemble
the bumper on its place. Refasten also the exhaust with the rubbers.
5) Assemble (*) and tighten also firmly.
Composition
1 tow bar reference 1456
1 ball T43/M000
6 bolts M12-35
8 security washers M12
4 bolts M10-120
4 security washers M10
4 nuts M10
4 mounting tubes (-i)
2 bolts M12-60
4 nuts M12
2 washers 40-30-12-4
6 washers 40-35-12-4
1 mounting piece (-g)
1 mounting piece (-h)
1 security shackle (-s)
Note
Please consult your cardealer or owners manual for the maximal permissable towing mass.
Remove any bitumen coating on the fastening position for the tow bar.
When drilling, be carefull not to damage any brake lines, electrical wiring or fuel lines.
(*-*')
(C-*-*')
(B-C-*-*')
(A)
(A)
(A-C)
(A)
(B)
(B-C)
(B)
(A-C)
(A-B-C)
(A-B-C)
(*')
All bolts and nuts: quality 8.8