arjo MAA8000 Mode D'emploi page 11

Masquer les pouces Voir aussi pour MAA8000:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 47
Patient able to sit up: Stand behind the patient
Place the sling over the patient's back and head
Make sure that the centre line is aligned with the
Continue to step 16.
Patient not able to sit up:
lengthwise along the centre line, outside facing
(See Fig. 12 ) If log rolling is not possible, use an
respective Sliding sheet/tube IFU
sure that the centre line is aligned with the patient's
(See Fig. 13 )
Sliding sheet/tube IFU
Pull out the remaining part of the sling from under
Make sure that the: (See Fig. 13 )
sling's head support covers the neck/head area,
sling pieces are not twisted underneath the
Position the lift sideways with the lift legs wide
the spreader bar is positioned over the patient's
(See Fig. 14 )
WARNING
To avoid injury to the patient, pay close
attention when lowering or adjusting the
spreader bar.
Fig. 12
WARNING
To avoid injury, make sure the patient's
arms are placed inside of the sling.
WARNING
To avoid the patient from falling, make sure
that the sling attachments are attached
securely before and during the lifting
process.
Fig. 13
Fig. 14
11
avoid skin injuries, use an Arjo sliding sheet/tube
respective Sliding sheet/tube IFU.
Move the lift/spreader bar closer to the patient's
(See Fig. 8 )
Slightly lift the patient to create tension in the
Make sure that:
All loops are securely attached
If an adjustment is needed, lower the patient and
make sure that the weight of the patient is taken up
Make sure that: (See Fig. 15 )
the spreader bar is in a reclined position,
one caregiver pays attention the patient's head
and
that the other caregiver holds up the patient's
IFU
Fig. 15
EN

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Maa8000aMaa8010Maa8020Maa8030

Table des Matières