Entering Programming Mode - Motorola CLS Série Guide De L'utilisateur

Entering Programming Mode

Press and hold Push to Talk and
radio beeps and displays k, the channel number flashes, and the frequency
(indicated by l) and code (indicated by y) display alternately.
Note: If you press and release the Push to Talk button when programming
CSL1413 models, you will return to the front of the Programming Mode.
Selecting a Channel
1. In programming mode, press
and the frequency and code display alternately (this is the first
setting after you enter programming mode).
2. Press [ or ] to select the channel.
3. Press and hold Push to Talk to exit programming mode, or
press
S
Programming the Frequency
1. In programming mode, press
frequency number flashes.
2. Press [ or ] to select the frequency.
3. Press and hold Push to Talk to exit programming mode, or
press
S
Note: See page 43 for information on frequencies for communicating with other
business radios. If you are matching your _ Series radio to an existing
Spirit GT radio, see page 47.
32
to continue programming.
to continue programming.
for 3 seconds while turning the radio on. The
T
until the channel number flashes
S
until l displays and the
S