Panasonic KY-B926SL Mode D'emploi page 21

Troubleshooting
Autoboil Mode
Symptom Possible cause
Heating time takes too ■ The base of the pan or top plate is dirty.
long.
■ A lid has not been used.
■ Water was added to the pan during Autoboil Mode.
■ The lid is removed or the pan is moved during Autoboil
Mode.
■ Water has not boiled
The cookware size and material (e.g. non-stick coating)
after beeping. and the volume of water may affect the sensor detection.
Select a power level as required.
■ Water has boiled but
does not beep.
No power - heating The top plate is too hot for Autoboil Mode. Autoboil Mode
does not start. will start automatically when the top plate has cooled
down.
Low Temperature Cooking Mode
Symptom Possible cause
■ Preheating time ■ The pan has been moved away from Genius Sensor.
takes too long.
■ The base of the pan or top plate is dirty.
■ The actual
■ Water, oil, or food was added during preheating.
temperature is
■ The temperature on the base of the pan may vary
different from the set
from the set temperature depending on the type of
temperature.
cookware.
■ Food is not achieving
■ Due to the variety of food types and pans, the actual
set temperature.
temperature of food may be different from the set
temperature.
■ Cookware with a non-stick coating may affect the
sensor detection.
Adjust the temperature as required with
No power - heating The top plate is too hot for the temperature set. Heating
does not start. will start automatically when the top plate has cooled
down.
38
EN-
slider.
Troubleshooting
Pan Frying Mode
Symptom Possible cause
■ Preheating time ■ The pan has been moved away from Genius Sensor.
takes too long.
■ The base of the pan or top plate is dirty.
■ The actual
■ Water, oil, or food was added during preheating.
temperature is
■ The temperature on the base of the pan may vary
different from the set
from the set temperature depending on the type of
temperature.
cookware.
Adjust the temperature as required with
Deep/Shallow Frying Mode
Symptom Possible cause
■ Preheating time ■ The pan has been moved away from Genius Sensor.
takes too long.
■ The base of the pan or top plate is dirty.
■ The actual
■ More than 800 g of oil has been added.
temperature is
■ Hot oil, brown-coloured oil, cloudy oil, or oil with food
different from the set
sediment is used.
temperature.
■ The oil temperature may vary from the set temperature
or the preheating time may take longer depending on
the type, material, shape and size of the base of the
pan.
Adjust the temperature as required with
slider.
slider.
39
EN-