Autoboil Mode; Low Temperature Cooking Mode - Panasonic KY-B926SL Mode D'emploi

IH Cooking

Autoboil Mode

Available on the cooking zone with
1. Touch and hold the main power key to turn on
KY-B926SL
KY-B925GL
2. Select the cooking zone with
KY-B915AL
3. Touch Autoboil key. The appliance beeps 5 times
KY-B915AB
NOTE
Temperature '100' will flash in the display until the
boiling temperature is reached. After the water is boiled,
the appliance automatically sets the power level to "7".
Increase or decrease the power level as required.
4. Touch and hold the key of the cooking zone or
NOTE
■ The cookware size and material (e.g. non-stick coating) and the
volume of water may affect the sensor detection. If the water has
not boiled after beeping or it has boiled but the appliance does not
beep, select a power level as required.
■ Cooking Timer can be used with Autoboil Mode. (See page 29)
Autoboil Mode is developed for boiling water only.
To achieve the optimum performance, the following is
recommended.
Min. 3 cm
■
■
Min. 0.5 L / 1 L
■
In order to prevent water boiling over from the pan, the
following is recommended.
■
■
24
EN-
the power.
For large cookware, the whole flex cooking zone
can also be selected by touching either front or rear
cooking zone selector twice.
when the water reaches boiling point and maintains
a rolling boil. After beeping add ingredients and
adjust the heating power with the slider as required.
set the power level to "OFF" to turn off.
Use a lid until boiling.
Use a minimum of 0.5 L of water. If a larger pan
that covers 3 or more areas of flex cooking zone,
use a minimum of 1 L of water.
Minimum 1 cm of depth when flex cooking zone is
used.
No more than 70% pan capacity should be used.
There should be a minimum gap of 3 cm between
the lid and the water surface.
IH Cooking

Low Temperature Cooking Mode

.
KY-B926SL
KY-B925GL
.
KY-B915AL
KY-B915AB
NOTE
■
■
■
■
■
■
Available on the cooking zone with
1. Touch and hold the main power key to turn on
the power.
2. Select the cooking zone with
For large cookware, the whole flex cooking zone
can also be selected by touching either front or rear
cooking zone selector twice.
3. Touch Sensor Option key once to select Low
Temperature Cooking.
4. Touch slider to set the required temperature.
Temperature adjustable range: 65
See Genius Sensor Cooking Chart on page 32.
5. When the set temperature is reached, the
temperature display stops flashing and the
appliance beeps 5 times.
- When Low Temperature Cooking Mode is used
after cooking with high power, the temperature
display stops flashing when the set temperature
is reached but the appliance does not beep.
6. Touch and hold the key of the cooking zone or
set the temperature to "OFF" to turn off.
Due to the variety of food types and pans, the actual temperature of
food may be different from the set temperature. Increase or decrease
the setting until the required food temperature is achieved.
Cookware with a non-stick coating may affect the sensor detection.
Adjust the set temperature until the required temperature is achieved.
To achieve the optimum performance, it is recommended that the
following minimum amount is heated at any one time with Low
Temperature Cooking Mode.
- Water / milk: 200 g
- Any other food
types: 400 g
Minimum 1 cm of depth when flex cooking zone is used.
Due to the consistency of milk it is recommended to stir continuously
when heating, to prevent the milk from sticking to the bottom of the
pan and burning.
Cooking Timer can be used with Low Temperature Cooking Mode.
(See page 29)
.
.
o o
C to 120 C.
- All liquid and food
types: 400 g
25
EN-