Panasonic KY-B926SL Mode D'emploi page 16

IH Cooking
Deep/Shallow Frying Mode
Observe the following to keep Genius Sensor
functioning efficiently.
■
■
■
■
■
■
■
28
EN-
Follow instructions for quantity of oil.
Amount: 200 g to 800 g (0.22 L to 0.9 L)
Depth: minimum 1 cm
Place the pan in the centre of the cooking zone.
Do not use hot oil, brown-coloured oil, cloudy oil,
or oil with food sediment.
Observe the recommendations for suitable
cookware. (See page 18)
Ensure the top plate and bottom of the pan are
dry and clean.
Do not add ingredients before the temperature
display stops flashing. Heating may stop due to
an abnormality detected.
Once preheating has started, do not add oil or
move the pan to another cooking zone.
IH Cooking
Timer
Using Cooking Timer
Used to switch a cooking zone off automatically.
Cooking Timer can be set for multiple cooking zones.
1. Touch and hold the main power key to turn on
the power.
2. Perform the desired operation.
(See pages 22-26)
3. Touch Timer key once to select Cooking
Timer.
Cooking Timer symbol flashes when the
corresponding cooking zone is selected and until
the timer is set.
4. Touch slider to set the desired cooking time.
■ Timer can be set while the timer display is
flashing.
Cooking Timer setting range: 1 minute to
9 hours.
■ Slide to 90 minutes. Then touch '+' to increase
in hours.
■
Keep holding either '+' or '-' will increase or
decrease hours or minutes rapidly.
Cancelling Cooking Timer:
■ Set the timer to "0".
Adjusting countdown time
■ Once countdown has started, the timer can be
adjusted. Select cooking zone, press timer and
adjust with the slider.
5. When the timer reaches "0", the appliance
beeps 5 times and turns off the cooking zone.
NOTE
Cooking Timer can not be set for Deep/Shallow Frying Mode.
29
EN-