Rockwell Automation SP200 AC Manuel D'utilisation page 26

English
Table 3.1 – Keypad Operation (Continued)
Desired Action
View the
While in display mode, press and release the
number of the
key once. The present display parameter number
present display
will be displayed for 2 seconds. The display will
parameter
then return to the present parameter value.
Increment the
While in display mode, press the
display
desired parameter is displayed. Following a 2
parameter
second delay, the parameter value will be
number
displayed.
Increment the Press the PROG key to enter program mode.
program
Press the
parameter
displayed.
number
Decrement the Press the PROG key to enter program mode.
program
Press the
parameter
displayed.
number
Increment the Press the PROG key to enter program mode.
current program
Press the
parameter value
parameter number is displayed.
Press the
displayed.
Decrement the Press the PROG key to enter program mode.
current program
Press the
parameter value
parameter number is displayed.
Press the
displayed.
Clear faults
Press the red
3-2
User Steps
key until the
key until the desired number is
key until the desired number is
key while the desired program
key until the desired value is
key while the desired program
key until the desired value is
key.
SP200 AC Drive Remote Keypad