Table 3.1 - Keypad Operation - Rockwell Automation SP200 AC Manuel D'utilisation

Operating the Drive Using
the Remote Keypad
The following table tells you how to operate the keypad.
Table 3.1 – Keypad Operation
Desired Action
1
Start the drive
Press the green
Stop the drive
Press the red
1 Press and hold down the JOG key to jog the
Jog the drive
drive. The drive will jog at the frequency selected
in P-40 (Internal/Jog Frequency) until the key is
released.
Change the
Press the
direction of
motor rotation.
rotation
Increment the While in display mode (PROG LED is off), press
local speed
the key to increase speed.
reference
Decrement the While in display mode (PROG LED is off), press
local speed
the key to decrease speed.
reference
View the value While in display mode (PROG LED is off), the
of the present value of the present display parameter is
display normally displayed.
parameter
1
For the key or JOG key to work, a connection must be present between drive
control terminals 2 and 3. In addition, parameter P-10 must be set to 1.
Operating the Drive Using the Remote Keypad
English
C 3
HAPTER
User Steps
key to start the drive.
key to stop the drive.
key to change the direction of
3-1