CEMB SM1100 Manuel D'utilisation page 45

Press the locking button in position C to
contemporarily lock vertical and horizontal
arms (Fig.28a). In this case the tool will
be automatically positioned at a security
distance from the rim edge.
- Make the head go down on the rim.
- For correct tool positioning, the insert (B,
fig. 28b) must be at the end position with the
rim edge (C), where the vertical wall begins.
ATTENTION : Use the handle to achieve the
correct tool positioning on the rim.
- Press the block 30 to fix the tool position.
The distance between rim and tool head will remain unchanged till the control
button is in locking position.The operator can tilt the vertical post (i.e. when
handling a set of tyres having same dimensions) without repositioning the tool
on the rim.
Risk of hand crushing between demounting / mounting tool and the wheel.
2) Upper tyre bead coupling (fig. 29 - 30a - 30b)
- Create enough space between the rim and the tyre with the bead breaker disc to allow
the demounting tool to tilt..
- Operate control
User's manual
WARNING
WARNING
for demount tool tilting.
A
B
28b
EN
29
45