Tyre Demounting - CEMB SM1100 Manuel D'utilisation

- Press the pedal to turn
the turntable.
- Tap the control to raise the bead breaker
disc in small steps and remove the bead com-
pletely from the seat on the wheel (Fig. 26).
- Perform at least one full turn to break the
bead.
26
- Lower the lever to automati-
cally stop bead penetration and move the
disc away from the working area, and lower the entire unit out of the work area.

9.8. TYRE DEMOUNTING

1) Tool positioning (fi g.27 - 28a)
- Press the pedal to move the column into its working position. Press the
locking button into position A to contemporarily unlock working arm and horizontal arm.
The tool will move upwards in its rest position (Fig.28a). With the locking button in posi-
tion B, the tool can move freely downwards up to the rim edge or up to the minimum
working height (Fig.28a).
A
B
C
27
28a
44 User's manual