Main Working Elements Of The Machine; Commands - CEMB SM1100 Manuel D'utilisation

8. maIN WOrKING ELEmENTS OF THE
maCHINE
Learn your machine: knowing exactly how the machine works is the best way
to guarantee safety and machine performance.
Learn the function and layout of all controls.
Carefully check that all controls on the machine are working properly.
To avoid accidents and injury, the machine must be installed properly, operated
correctly and serviced regularly.
1 Body with tool-tray
2 Centring handle (device for clamping the wheel to the turntable)
3 Movable lever-less head for tyre mounting/demounting
4
Tilting column
5 Demounting tool control cylinder
6
Cylinder for movable head descent
7 Console
8 Wheel resting and centring unit
9 Clamping control handle
10 Bead breaking unit
11
Bead breaker disc
18 Filter Regulator + Lubricator Unit (regulates pressure, filters, removes humidity of
and lubricates the compressed air supplied)
22 Doyfe inflator chuck
27 Upper bead breaker arm release hook
31 Lever for the manual movement of the bead breaker arms
33 Adjustable bead breaking support foot
34
IPL-2: Wheel lift
35 IPH: bead pressing device
37 Handle
39 Bead breaker blade
40 Wheel pad

8.1 COMMANDS

8.1.a.
COMMAND CONSOLE
17 Pressure gauge for reading inflation pressure
20 Deflation push-button
21 Control valve for upper bead breaking arm ascent descent
23 Control valve for lower bead breaking arm ascent descent
24 Control valve for locking dual-position bead breaker supports
25 Control push-button for upper bead breaker disc penetration (the bead breaker
disc is activated by pressing this push-button; every time the lever 21 is operated
upwards –the bead breaker disc moves away from the rim-, the bead breaker disc
is deactivated)
User's manual
ATTENTION
EN
29