Clamping The Wheel On The Turntable - CEMB SM1100 Manuel D'utilisation

9.5. CLAMPING THE WHEEL ON THE TURNTABLE

9.5.a. Manual clamping the wheel (Manual Lock - ML version)
to the self-centering spindle (fi g.17A)
- Insert the clamping handle in the central hole of the wheel (A - Fig. 17a)
- Turn the handle to engage correctly with the turntable (B - Fig. 17a)
- Manually move the centring cone into position against the wheel by moving the retain-
ers "1" (C - Fig. 17a)
- Tighten the clamping device by turning the handle clockwise (D - Fig. 17a)
A
C
User's manual
B
D
1
"ML" version
17a
EN
39