INSTRUCTIONS ON ASSEMBLY AND USE
EN
CONGRATULATIONS ON PURCHASING THIS PRODUCT!
Please read these instructions carefully. The instructions are an integral compo-
nent of the product. Therefore, please store them and the packaging carefully in
case questions arise in the future. Please always include these instructions
when handing on the product to a third party. This product must be assembled
by an adult. This product is not designed for industrial use. The use of the pro-
duct requires certain capabilities and skills. Always adjust according to the age
of the user and use for the purpose it has been designed for.
TECHNICAL SPECIFICATIONS
Item:
Pop up football goal 2 pcs set
Item number: 76994
Dimensions:
assembled: 120 x 80 x 80 cm, folded: approx. 38 x 38 x 2 cm
Weight:
Approx. 0.8 kg per goal
If you have assembly problems or would like further information on the product,
we have all you need and more at http://www.hudora.de/.
CONTENTS
2 x Pop up football goal | 2 x 2 Posts | 2 x 4 Tent pegs | 1 x Carrying case |
1 x These instructions
Other parts which may be included with the delivery in some circumstances are
not required.
SAFETY INSTRUCTIONS
• WARNINGS! Not suitable for children under 36 months due to small swallo-
wable parts and long cords. Choking hazard. Strangulation hazard.
• Pay attention to a sufficient distance from the face. The football goal unfolds
by itself.
ASSEMBLY AND FOLDING INSTRUCTIONS
The football goal pop up from HUDORA is set up and folded back together within
seconds.
ASSEMBLY: Remove the football goal from the bag. The product unfolds on its
own within a few seconds. Plug the two parts of the rods into one another. Fix
the side stabilisers of the goal with the help of the rods. Simply pull the zipper of
the stabiliser pouch open for this purpose and introduce the rods. Subsequently
pull the zipper closed again.
STAND LOCKING OF THE GOAL: Finally fix the goal frame by means of the pegs
on the ground. Ascertain that the ground is suitable for the application of pegs
(e.g. no water pipes for sprinkler devices!). Make sure that the pegs are com-
pletely driven into the ground and have firm position. Avoid protruding fastenings
(risk of stumbling). On too hard grounds the goal must be saved by appropriate
measures in another way against overturning in order to prevent risk of injuries.
Never play with an unsecured goal or never leave the goal unsecured respec-
tively.
FOLDING: Remove the anchoring of the goal followed be the removal of the rods
from the side stabiliser pouch. With the right technique and a little practice, the
goal can be easily and quickly folded back (Picture 1 - 4).
USAGE INSTRUCTIONS
• Only set up the goal on level ground.
• Please keep a minimum distance of at least 3 m to any surrounding obsta-
cles.
• Secure the goal to keep it from toppling over – even if not in use.
• Avoid exposing the product unnecessarily to bad weather conditions. Keep it
in a cool and dry storage area.
All images are examples of the design.
MAINTENANCE AND STORAGE
Use a dry or damp cloth only to clean the product; do not use special cleaning
agents! Check the product for damage or traces of wear and tear before and
after each use. Do not make any structural changes. For your own safety, please
use original spare parts only. These can be sourced from HUDORA. If parts be-
come damaged or if sharp edges or corners should develop, the product may not
be used any more. If in any doubt, please contact our service team (http://www.
hudora.de/). Store the product in a safe place where it is protected from the
elements, cannot be damaged, and cannot injure anyone.
DISPOSAL ADvICE
At the end of the product's life, please dispose of it at an appropriate collection
point provided in your area. Local waste management companies will be able to
answer your questions on this.
SERvICE
We make every effort to deliver faultless products. If faults do arise however, we
put just as much effort into rectifying them. Therefore, you can find numerous
information on the product, replacement parts, solutions to problems and lost
assembly manuals at http://hudora.de/service/.
4/8