Setting The Clock And Timer; To Set The Time Of Day; To Set The Timer - Haier HCW3485AES Guide De L'utilisateur

SETTING THE CLOCK AND TIMER

The time of day is displayed in hours and minutes.
Always set the clock immediately after installation or after a power failure. Once
power returns to the oven, the clock displays the time 12:00
The clock time will appear during all oven operations except when there is the timer
or any timed cooking operations running.
The oven is preset to a 12-hour clock and indicates

TO SET THE TIME OF DAY

1. Touch [TIME] until the display shows the "SET TIME" writing.
2. Touch [INC] or [DEC] to set the desired time, the hours will begin flashing:
continue until the correct hour value and AM or PM indication is selected.
3. Touch [TIME] again to confirm the hour and minutes will start flashing.
4. Touch [INC] or [DEC] to set the desired minutes value or hold the key to change
by 10 minute steps.
5. Touch [TIME] again or wait for 5 seconds in order to confirm the time.
NOTE: The Time of Day can never be set if any time function is already set: first
delete all the active time functions.

TO SET THE TIMER

1. Touch [TIME] until the display shows the "TIMER" writing.
2. Touch [INC] or [DEC] to set the desired timer value, the hours will begin flashing:
continue until the desired value is set.
3. Touch [TIME] again to confirm the hour and minutes will start flashing.
4. Touch [INC] or [DEC] to set the desired minutes value or hold the key to change
by 10 minute steps.
5. Touch [TIME] again or wait for 5 seconds in order to confirm the time.
6. "TIMER" will be steadily displayed.
7. When the time ends, reminder beeps will sound for 15 minutes or until the
[TIME] key is pressed.
8. Timer format is usually HR:MIN, switching into MIN:SEC during the last minute.
9. The displayed value is always rounded to the lower minute.
.
AM
and .
AM PM
15