Haier HCW3485AES Guide De L'utilisateur page 16

Masquer les pouces Voir aussi pour HCW3485AES:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Always be sure to position the oven racks before turning on the oven. Make sure
that the racks are level once they are in position.
Please refer to "Features of Your Oven" if there is any question as to which side is
the front of the rack.
The racks are designed to stop when pulled forward to their limit.
IMPORTANT: Never use aluminum foil to cover the oven racks or to line the oven. It
can cause damage to the oven liner if heat is trapped under the foil.
IMPORTANT: Make sure you do not force it to avoid damage to the enamel.
To remove oven rack from the oven:
1. Pull rack forward.
2. Lift rack up at front and then remove it.
To replace an oven rack:
1. Place rear of rack between rack level guides
2. While lifting front of rack, slide rack in all the way while lowering the front.
14

Publicité

Table des Matières
loading

Table des Matières