Selecting The Oven Mode; Setting Cooking Mode And Temperature - Haier HCW3485AES Guide De L'utilisateur

SELECTING THE OVEN MODE

SETTING COOKING MODE AND TEMPERATURE

•
The following modes can be selected by moving the cooking mode knob to the
desired position. To select Clean, the temperature knob must be moved into the
appropriate Clean position too.
OFF
CONVECTION BAKE (CONV BAKE)
CONVECTION BROIL (CONV BROIL)
CONVECTION ROAST (CONV ROAST)
PIZZA (MULTI PIZZA)
BAKE (BAKE)
BROIL (BROIL)
DEHYDRATE(CONV DEHY)
PROOF (WARM)
DEFROST (CONV)
WARMING (WARM PLUS)
CLEAN
•
Select the desired temperature by moving the selector or leave it in the PRESET
position if the proposed value is fine. The temperature can be changed by 5°F or
5°C steps.
•
As soon as one of the knobs is moved, the control switches automatically
to display the value in the corresponding cavity. The corresponding writing
"UPPER" or "LOWER" appears.
•
Cavity will begin to heat, the "ON" writing is displayed when the selected oven is
active, oven lights will turn on.
•
"PREHEAT" writing will turn on. Once the oven has preheated, it will beep and
switch the writing off.
•
To change the temperature while cooking, simply turn the temperature knob
until the display shows the desired value.
•
Touch [UPPER/LOWER] to select the desired cavity and check the related
temperature or time values, even is there's no need to change those.
•
Move the cooking mode selector to OFF if you intend to stop cooking.
The triangles in the upper right corner of the display are active when a cavity is
running, even if it is not selected on the display.
16