Ordesa; Etna And Derby 9 / Derby 14; Dover - Bronpi ALHAMBRA Instructions D'installation, D'utilisation Et D'entretien

The model Oxford also includes a handle with a double
function: remove the ash pan and apply over the pull
of the rotating cast doing possible to move it avoiding
burnings (see drawing D29).
In the same way, the model Zamora also includes a
handle to remove the ash pan avoiding burns (see
drawing D30).
2.1.5.

ORDESA

Inside of the combustion chamber you can find a piece called "ash catcher". This piece is useful to avoid the fall of the ashes to the floor
when you open the door of the stove. To place it properly, follow the next steps:
1. We must match the hooks of the piece with the groove of the stove. To this, rotate slightly the piece.
2. When the piece is inserted on the grooves, drop it from its own weight to rest in his final position (see drawing D31).
In the stove, it is included a handle to remove the ash pan to avoid burns (see drawing D30).
D30
2.1.6.

ETNA AND DERBY 9 / DERBY 14

The models Etna, Derby 9 and Derby 14 have a door on the right side whose function is to load fuel (see drawing D32).
In the Etna stove, it is included a handle to remove the ash pan which is hidden behind the lower door (see drawing D33).
D32
2.1.7.

DOVER

The Dover model has on the top, between the combustion chamber and the top (see drawing D34), a ceramic thermal storage which allows
the stove to radiate heat for a longer time (even when the stove is switched off), increasing the thermal inertia of the stove.
For its replacement, it is necessary to remove the top of the stove, so you have to remove the 4 screws located on the top of the oven (see
drawing D35) and then you will be able to extract this ceramic piece or even increase the number of them, in order to raise the power of
thermal radiation (max 4 pieces).
INSTALLATION, OPERATING AND SERVICING INSTRUCTIONS
D34
22
D29
D31
D33
STOVES