Voice Recording; Battery Removal - Trevi XF 1800KB Mode D'emploi Et Branchement

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

ENGLISH
3. Select the Radio function by MODE button(3) on the unit, or the MODE(29) on the remote control.
4. Press REC button(4) on the unit or the RECORD button(30) on the remote control to start recording, the display(20) and time
signature will start.
5. Press REC button(4) on the unit, or the RECORD button(30) on the remote control to stop recording. The device will automatically
go into USB function to immediately playback the recorded file. After playing the unit will report on the initial function.
Note:
-
You can record the audio only from Radio functions. Even inserting and using the supplied microphone, the unit will record
only the audio signal transmitted from these sources, it will not record the vocals done with the microphone.
-
When you turn on the "Registration" all the controls of the unit are inhibited including volume adjustment, they will take their
normal function when the recording will stop.

VOICE RECORDING

This unit and 'capable of recording the vocals on the USB memory or SD card when using the supplied microphone. The device
will automatically create a folder called "Record" inside the USB memory and it will store all log files.
1. Turn on the unit.
2. Insert a USB memory or a SD Card into the socket.
3. Select the USB functon by MODE button(3) on the unit, or the MODE button(29) on the remote control.
4. Press REC button(4) on the unit or the RECORD button(30) on the remote control to start recording, the display (20) will show
"REC" and the time signature will start.
5. Press REC button(4) on the unit, or the RECORD button(30) on the remote control to stop recording. The unit will play, auto-
matically, the recorded file.
Note:
-
You can record only the voice.
INFORMATION NOTE ON THE REMOVAL BATTERY
Warning: Only high-qualified personnel should perform this operation!

BATTERY REMOVAL

The appliance should not be plugged to the mains socket when performing this operation!
1. Remove the screws that secure the slot panel battery;
2. Remove the metal panel;
3. Remove the screws that secure the supports of the battery, remove the supports, disconnect the battery and remove it.
12
XF 1800KB

Publicité

Table des Matières
loading

Table des Matières