Bluetooth Function; Using The Microphone - Trevi XF 1800KB Mode D'emploi Et Branchement

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

ENGLISH
DIRECT RECALL OF FREQUENCY
1. Use the keypad (25) on remote control to tune the desired frequency.
For example, to listen to 93.1MHz frequency type 9 3 1.
Note:
-
The FM reception depends on the place where you place the unit.
-
The proximity of TV sets, fluorescent lamps or other appliances may cause interference in the reception of radio programs,
in this case, move this unit.

BLUETOOTH FUNCTION

1. Turn on the machine and press the MODE(3) on unit, or the MODE(29) on remote control to select the Bluetooth function, the
display shows "BLUE".
2. In the Bluetooth mode, the symbol
3. Activate the Bluetooth feature on the external device to be coupled.
4. Initiate a search for devices. After select the "XF 1008KB".
5. Enter the password "0000" if required.
6. Press the PLAY button(6)on the unit or the key(26) on remote control, to start playing and the buttons NEXT(7) and PREV(5),
or the keys :NEXT(34) and 9LAST(32) for the selection of songs.
PLAY ON INPUT USB/SD
1. Turn on the unit.
2. Insert a USB memory or an SD card into the USB or SD(2) slot. Playback starts automatically.
3. To pause playback, press the PLAY button(6) on the unit or the key (26) on remote control, the display will show "PAUS".
4. To resume playback, press the PLAY button(6) on the unit or the key (26) of the remote control.
5. Press the NEXT(7) or key : NEXT(34) on remote control while listening to switch to the next track. Press the PREV (5) or 9
LAST(32) on remote to go to the previous tracks.
6. Using the numeric keypad(25) on remote control you can directly enter the number of the song you want to play.
7. Press once REPEAT button(24) on the remote, the display(20) will show "ONE", to continually play the same track; press it a
second time, the display(20) will show "ALL" to continuously play all songs in the USB/SD.
Note:
-
The player may not support some USB/SD devices, this is due to the incompatibility of some processors.
-
To avoid harmful interference, always connect USB devices directly to the unit, do not use extension cords.
-
From the computer to format the USB memory/SD FAT (16 or 32).
AUX-IN
1. Turn on the unit.
2. Connect any unit equipped with audio output, through a cable 3.5mm jack (not included) to the AUX IN(17).
3. Press the MODE button(3) on the unit, or the MODE(29) on remote control, and select the "LINE-IN", the display will show "LINE".
4. Use the external device from their commands.

USING THE MICROPHONE

1. Connect the supplied microphone into the jack MIC1 or MIC2(10).
2. Turn on the microphone using the switch on the handle of the microphone to the ON position.
3. Adjust the volume of the microphone input(1) and the echo effect(14) as desired using the appropriate commands.
Note:
-
You can use two microphones simultaneously (second microphone not included).
RECORDING
MUSIC RECORDING
This unit and 'capable of recording on USB or SD card memory the music from radio function (it is NOT possible to record from
the Bluetooth, Aux-in). The device will automatically create a folder called "Record" inside the USB memory or SD Card and it will
store all log files.
1. Turn on the unit.
2. Insert a USB memory or a SD Card into the socket.
on display(20) will start flashing, the system automatically enters search mode.
11
XF 1800KB

Publicité

Table des Matières
loading

Table des Matières