SKF TKRS 41 Mode D'emploi page 15

No. Position of the
selector switch (E)
10. MENU
How to select an internal / external trigger:
1. Turn the selector switch (E) to the "MENU" position.
2. Select the INT / EXT parameter using the rotary/push knob (D).
Push the rotary/push knob (D) to conirm a parameter selection.
3.
→ The display will now show the selection of INT and EXT parameters:
→ the active setting will lash
4. Select the desired parameter using the rotary/push knob (D).
5. Conirm and exit selection by pushing the rotary/push knob (D).
þ
This setting is now active.
N O T E :
The display and adjustable value can be changed by
turning the rotary/push knob (D).
Display Adjustable Description
parameters
INT / EXT Internal / external trigger
EN 13