Technical Data - Hilti SF 100-A Mode D'emploi

Technical data

SF100-A battery screwdriver
Voltage:
Screwdriver weight incl. battery and chuck:
Dimensions (l×h×w):
Speed (no load):
Chuck / Quick-release chuck capacity:
Torque:
Torque adjustment:
Speed control:
Reversing switch:
Spindle lock:
Motor brake:
Dust-tight enclosure and permanent lubrication (maintenance free)
Battery
Voltage:
Capacity:
Weight:
Temperature monitoring:
Type of cell:
No. of cells:
Right of technical modifications reserved
2
Printed: 07.07.2013 | Doc-Nr: PUB / 5070586 / 000 / 00
9.6 Volt
1.8 kg (4 lbs)
225×223×61 mm (9×9×2.5")
1st speed: 0–350 r.p.m.
2nd speed: 0–1250 r.p.m.
0.8–10 mm ( 1 / –.4")
32
max. 16 Nm (set at drilling symbol)
1–7 Nm (1–5 ft. lbs) (at 20 settings)
electronic via on-off switch
electronic with switching lock when running
when the screwdriver is switched off
activated by the control switch
SBP10
9.6 Volt
9.6 Volt×2.0 Ah = 19.2 Wh 9.6 Volt×3.0 Ah = 28.8 Wh
0.55 kg (1.2 lbs)
yes
nickel-cadmium
Sub C design
8
SFB105
9.6 Volt
0.60 kg (1.3 lbs)
yes
nickel-metal hydrid
Sub C design
8