2.3 Additional items required for operating the tool
One B 22/3.3 Li-Ion, B 22/2.6 Li-Ion or B 22/1.6 Li‑Ion battery with a C4⁄36‑90 or C4⁄36‑350 or C 4/36 or C 4/36‑ACS
charger.
2.4 Li-ion battery charge status and overheating indicator
LEDs light constantly
LED 1, 2, 3, 4
LED 1, 2, 3
LED 1, 2
LED 1
-
-
3 Accessories
Designation
Battery
Battery
Battery
Charger
Charger for Li-ion batteries
Charger for Li-ion batteries
Foil pack holder
Foil pack holder
Foil pack holder
Foil pack holder
4 Technical data
Right of technical changes reserved.
Power tool
Weight in accordance with EPTA procedure 01/2003
Rated voltage (DC voltage)
Dimensions (L x W x H)
Dispensing mode selector switch
Motor stop
Noise information (measured in accordance with EN 60745‑1):
Typical A-weighted sound power level
Typical A-weighted emission sound pressure level
Uncertainty for the given sound level
NOTE
The vibration emission level given in this information sheet has been measured in accordance with a standardised test
given in EN 60745 and may be used to compare one tool with another. It may be used for a preliminary assessment
LEDs blink
-
-
-
-
LED 1
LED 1
Short designation
B 22/2.6 Li‑Ion
B 22/1.6 Li‑Ion
B 22/3.3 Li‑Ion
C 4/36 or C 4/36‑ACS
C 4/36‑90
C 4/36‑350
HIT CB 500
HIT CB 330
HIT CR 500
HIT CR 330
2.62 kg
21.6 V
436 mm x 120 mm x 221 mm
Modes available: off, continuous dispensing, measured
volume dispensing with settings 1 to 15
Electronic overload prevention cut-out
78 dB (A)
67 dB (A)
3 dB (A)
Charge status C
C ≧ 75 %
50 % ≦ C < 75 %
25 % ≦ C < 50 %
10 % ≦ C < 25 %
C < 10 %
Battery overheated
Description
500 ml, black
330 ml, black
500 ml, red
330 ml, red
en
15