Removing The Battery; Troubleshooting - SilverCrest SHBS 600 A1 Mode D'emploi

BB.5$B%ERRN 6HLWH  0LWWZRFK  -DQXDU    

Removing the battery

• This device is operated with a rechargea-
ble lithium-ion battery, which you must re-
move before disposing of the device.
• You must be technically minded to re-
move the battery, otherwise there is the
danger of injuring yourself. If you do
not have any experience with tools, you
should have the batteries removed by a
person who is qualified to do this.
DANGER from batteries!
~ Ensure that the battery is not damaged
as you remove it. Fire hazard!
~ The removed battery must not be disas-
sembled.
~ Never short-circuit the battery. The con-
tacts on the removed battery must not
be connected by metallic objects. The
battery may overheat and explode.
~ Only remove the battery to dispose of
the device. The device is destroyed by
removing the battery. Never try to oper-
ate a disassembled device.
1. Disconnect the device from the mains.
2. Switch on the device and let it run until
the battery is empty.
3. Figure E: remove the attachment|3
from the hair and beard trimmer|4 by
pressing it with the thumb towards the
rear.
4. Figure G: use a Phillips screwdriver to
release the 3 screws on the back and
on the top end of the device.
5. Figure H: use a screwdriver to lever
open the side seam and unfold the two
halves of the housing apart.
6. Figure I: release the connections be-
tween the battery and the board with a
pair of pliers/wire cutters. Remove the ex-
posed battery. Take the battery and the
device separately to suitable disposal.
46 GB
The lithium-ion battery used
for this device may not be
treated as household waste.
The battery must be dis-
posed of properly. Contact
battery distributors or local
waste disposal points for
this.

10. Troubleshooting

If your device fails to function as required,
please try this checklist first. Perhaps there is
only a minor problem, and you can solve it
yourself.
DANGER! Risk of electric
shock!
Do not attempt to repair the device
yourself under any circumstances.
Possible causes /
Fault
• Has the device
been connected to
No function the power supply?
• Is the battery emp-
ty?
• Has the attach-
Trimmer attach-
ment been
ment|3 starts with
cleaned, and
difficulty
oiled if necessary?
Li-ions
Action