Pelgrim IDK862ONY Notice D'utilisation page 31

OPERATION
Assigning and switching on the cooking timer
The hob is switched on, at least one cooking zone is active (the cooking
timer can only be linked to active cooking zones).
• Press the timer button several times until the timer indicator
(corresponding to the correct cooking zone) in the timer display
starts blinking.
'00' is shown in the display. There is a timer indicator in the timer
display and a timer symbol in the display of the corresponding
cooking zone; both will blink.
• Use the - button or the + button to set the desired time.
• Press the timer button again to confirm the setting.
The cooking timer starts.
▷ If you do not use the - and the + buttons to set a time, the
cooking timer will automatically switch off after 10 seconds.
• Repeat the steps to set the time for another active cooking zone.
Attention
When there is more than one timer active, the display will show the
shortest remaining time and the timer dot corresponding to it.
Switching off the cooking timer
• Press the timer button several times until the timer indicator
(corresponding to the correct cooking zone) in the timer display
starts blinking.
The remaining time is shown in the display with a binking indicator.
• Touch and hold the - button until '01.' appears in the display.
Press the - button one more time; '00' appears in the display.
The cooking timer is now switched off.
▷ You can also touch the - button and the + button simultaneously
to switch off the cooking timer at once.
Switching off the cooking timer/egg timer alarm
When the set time/cooking time has elapsed, you will hear the alarm.
• Touch any button to switch off the alarm.
Tip
• You can touch and hold the - or the + button to set the desired
cooking time faster.
EN 13