General Information; Validity Of The Operating Instructions; Extent Of Supply; Contact - oventrop Unibox TQ vario Notice D'utilisation

Unibox TQ vario
1.

General information

The original operating instructions were drafted
in German.
The operating instructions in other languages
have been translated from German.
1.1 Validity of the operating
instructions
These operating instructions are valid for the
individual room temperature control "Unibox
TQ vario".

1.2 Extent of supply

Please check your delivery for any damage
caused during transit and for completeness.
Items included in the delivery:
• "Unibox TQ vario" with protection cover
• Brackets
• Operating instructions
On delivery, the inside of the
"Unibox TQ vario" is protected by a
protection cover made of cardboard
(see Illust. 1 auf Seite 19).
Illust. 1: Protection cover on "Unibox TQ
vario"
102272980-V01.02.2020
General information

1.3 Contact

Contact address
OVENTROP GmbH & Co. KG
Paul-Oventrop-Straße 1
59939 Olsberg
GERMANY
Technical services
Phone: +49 (0) 29 62 82-234

1.4 Declaration of conformity

Oventrop GmbH & Co. KG hereby declares that
this product complies with the basic require-
ments and other relevant provisions of the EC
Directives concerned.

1.5 Symbols used

Highlights important information
and further explanations.
Action required
f
• List
1. Fixed order. Steps 1 to X.
2.
Z Result of action
2.

Safety-related information

2.1 Correct use

Operating safety is only guaranteed if the prod-
uct is used correctly.
The "Unibox TQ vario" is used in combination
with a thermostat with remote control or a
room thermostat with actuator for individual
room temperature control in surface heating
systems. The "Unibox TQ vario " is used in low
temperature heating systems with a max. flow
temperature of 55 °C.
The flow rate is automatically controlled by the
integrated valve insert "QA".
Any other use of the product will be considered
incorrect use.
Claims of any kind against the manufacturer
19