Operation; How To Use - Titanium Speedline A3 6R Guide D'utilisation

6. Operation

Film Thickness
(mic)
75 - 100
125 - 100
175 - 100
* If user use a low temperature film, please decrease 15~20°C
* To avoid machine damaged, please set suitable temperature and speed.

How to Use

1. Turn the switch on
2. If it is not the first use, Press POWER button for 1 second.
3. Press HOT button. Initial setting for 100 MIC is 100°c, 6.
Hot icon flickers.
4. When it's ready, there will be beep sound for 3 times. You
can start to laminate.
Insert the sealing of film forward.
5. Beginning lamination -If user wishes to laminate faster:
User can increase
the speed (the step of 1~9) -When adhesion of
lamination is not satisfactory,
increase the temperature.
6. Finishing lamination. Press POWER button for 1 second.
Once it reaches below 65°C the power stops automatically. (Keep the temperature
70°C and speed 2 for "STAND BY" mode.)
Do not turn off the Switch as soon as finishing lamination to
prevent overheating. Follow the Upper method.
24
Paper
Copy paper (80gsm)
Art paper (120gsm)
Hard paper (200gsm)
Copy paper (80gsm)
Art paper (120gsm)
Hard paper (200gsm)
Copy paper (80gsm)
Art paper (120gsm)
Hard paper (200gsm)
Speedline A3 6R
Setting without Carrier
Temp Speed
(°C)
A2/A3 A4
100 6 7
100 5 6
100 4 5
120 4 5
120 3 4
130 3 4
120 3 4
140 2 2
150 1 2
Setting with Carrier
Temp Speed
(°C)
A2/A3 A4
130 4 5
130 4 5
130 3 4
130 3 4
140 3 4
140 2 3
140 2 3
150 2 3
150 1 2