Titanium Speedline A3 6R Guide D'utilisation page 22

− Protect the laminator from direct sunlight.
− Never place the laminator on or near hot surfaces (e.g. stovetops,
heaters etc.).
− Ensure that the mains cord does not come into contact with hot parts.
− Never expose the laminator to high temperatures (heaters etc.) or
to the effects of the weather (rain etc.).
− Never fill the laminator with liquid.
− Never laminate damp documents or organic objects (e.g. flowers,
leaves etc.).
− Do not cut the laminating pouches into pieces before laminating
and do not in any case cut off the sealed edges from the
laminating sheets.
− Stop using the laminator if its plastic parts exhibit cracks or breaks
or are deformed. Only replace damaged parts with corresponding
original spare parts.
− Only laminate at room temperature (approx. 10–25 °C).
− Never insert metallic objects (e. g. paper clips, staples etc.) or
objects other than laminating pouches which are intended for this
laminator into the laminating pouch infeed slot.
− The laminator has vents. Never cover them with other objects
such as magazines, blankets or similar.
− Ensure that the mains cord does not come into contact with hot parts.
− Never expose the laminator to high temperatures (heaters etc.) or
to the effects of the weather (rain etc.).
− Never fill the laminator with liquid.
− Never laminate damp documents or organic objects (e.g. flowers,
leaves etc.).
− Do not cut the laminating pouches into pieces before laminating
and do not in any case cut off the sealed edges from the
laminating sheets.
22
Speedline A3 6R