First Use; Checking The Laminator And Product Contents; Setting Up The Laminator - Titanium Speedline A3 6R Guide D'utilisation

− Stop using the laminator if its plastic parts exhibit cracks or breaks
or are deformed. Only replace damaged parts with corresponding
original spare parts.
− Only laminate at room temperature (approx. 10–25 °C).
− Never insert metallic objects (e. g. paper clips, staples etc.) or
objects other than laminating pouches which are intended for this
laminator into the laminating pouch infeed slot.
− The laminator has vents. Never cover them with other objects such
as magazines, blankets or similar.

5. First use

Checking the laminator and product contents

Risk of damage!
If you are not cautious when opening the packaging with a sharp
knife or other pointy object, you may quickly damage the laminator.
− Therefore, be very careful when opening.
1. Take the laminator out of the packaging.
2. Check whether the laminator or the individual parts exhibit damage. If this is the
case, do not use the laminator. Contact the manufacturer at the service address
specified on the warranty card.
3. Check to make sure that the delivery is complete

Setting up the laminator

1. Position the laminator so that there is enough space to insert a laminating pouch.
Do not position the laminator directly in front of a wall or other objects.
2. Connect the mains plug to a properly installed socket with a protective conductor
(230 V = house connection).
Speedline A3 6R
23