Setting Up The Laminator; Activating / Deactivating The Laminator; Operation; Risk Of Injury - Titanium HomeOffice PL 250 Guide D'utilisation

case, do not use the laminator. Contact the manufacturer at the service address
specified on the warranty card.
3. Check to make sure that the delivery is complete.

Setting up the laminator

1. Position the laminator so that there is enough space to insert a laminating
pouch. Do not position the laminator directly in front of a wall or other objects.
2. Connect the mains plug to a properly installed socket with a protective conductor
(230 V = house connection).

Activating / deactivating the laminator

1. Move the ON/OFF switch
The ready indicator
reached the correct temperature for lamination. The preheating time may vary
depending on the ambient temperature and air humidity.
2. Move the ON/OFF switch

7. Operation

Risk of injury!

Handling the laminator improperly may result in injury.
− If an object (sleeves, tie etc.) is unintentionally taken into the
laminating pouch infeed slot, immediately disconnect the
mains plug. Risk of damage!
Improper handling of the laminator may lead to dama-
ge to the laminator or documents.
− Do not in any case laminate documents with a treated
surface (e.g. fax or thermopaper, Polaroid pictures etc.) and
papers with surfaces that may be altered through heat
(tickets, ultrasonic scans etc.).
2
to "ON" (–) to switch the laminator on.
1 will turn from dark blue to red once thelaminator has
2
to "OFF" ( O ) to switch the laminator off.
27
27