First Use; Checking The Laminator And Product Contents - Titanium HomeOffice PL 250 Guide D'utilisation

− Protect the laminator from direct sunlight.
− Never place the laminator on or near hot surfaces (e.g.
stovetops, heaters etc.).
− Ensure that the mains cord does not come into contact with
hot parts.
− Never expose the laminator to high temperatures (heaters
etc.) or to the effects of the weather (rain etc.).
− Never fill the laminator with liquid.
− Never laminate damp documents or organic objects (e.g.
flowers, leaves etc.).
− Do not cut the laminating pouches into pieces before
laminating and do not in any case cut off the sealed edges
from the laminating sheets.
− Stop using the laminator if its plastic parts exhibit cracks or
breaks or are deformed. Only replace damaged parts with
corresponding original spare parts.
− Only laminate at room temperature (approx. 10–25 °C).
− Never insert metallic objects (e. g. paper clips, staples etc.)
or objects other than laminating pouches which are
intended for this laminator into the laminating pouch infeed
slot.
− The laminator has vents. Never cover them with other
objects such as magazines, blankets or similar.

6. First use

Checking the laminator and product contents

If you are not cautious when opening the packaging with
a sharp knife or other pointy object, you may quickly
damage the laminator.
− Therefore, be very careful when opening.
1. Take the laminator out of the packaging.
2. Check whether the laminator or the individual parts exhibit damage. If this is the
26
26