Balluff BMD 1L K Série Notice D'utilisation page 187

Contacts
Pressure resistance
Conductive connection
Pipe thread, conical (ASME B1.20.1)
Flanges
Weight
Instrument weight (depending on
Rod: ø 12 mm (0.472 in)
Cable: ø 2 mm (0.079 in)
Cable: ø 4 mm (0.157 in)
Gravity weight for cable ø 2 mm
(0.079 in)
Gravity weight for cable ø 4 mm
(0.157 in)
Centering weight ø 40 mm (1.575 in)
Centering weight ø 45 mm (1.772 in)
Centering weight ø 75 mm (2.953 in)
Centering weight (ø 95 mm (3.74 in)
Probe length L (from seal surface)
Rod: ø 12 mm (0.472 in)
Trimming accuracy - rod
Cable: ø 2 mm (0.079 in)
Cable: ø 4 mm (0.157 in)
Trimming accuracy - cable
Lateral load
Rod: ø 12 mm (0.472 in)
Max. tensile load
Cable: ø 2 mm (0.079 in) - 316
(1.4401)
Cable: ø 2 mm (0.079 in) - Alloy C276 1.0 KN (225 lbf)
Cable: ø 4 mm (0.157 in)
Thread in gravity weight, e.g. for eye-bolt
(cable version)
Alloy C22 (2.4602)
< 10 mbar l/s
-6
See process pressure of the sensor
¾ NPT, 1 NPT, 1½ NPT
DIN from DN 25, ASME from 1"
approx. 400 g/m (4.3 oz/ft)
approx. 16 g/m (0.17 oz/ft)
approx. 60 g/m (0.65 oz/ft)
100 g (3.22 oz)
200 g (6.43 oz)
1050 g (33.76 oz)
up to 6 m (19.69 ft)
up to 6 m (19.69 ft)
up to 75 m (246.1 ft)
up to 75 m (246 ft)
30 Nm (22.13 lbf ft)
1.5 KN (337 lbf)
2.5 KN (562 lbf)
12 Supplement
73