Balluff BMD 1L K Série Notice D'utilisation page 154

7 Set up with the display and adjustment module
Setup - Current output,
mode
Setup - Current output
Min./Max.
40
Fig. 19: Vessel height and socket correction value
D Vessel height
+h Positive socket correction value
-h Negative socket correction value
In the menu item "Current output mode" you determine the output
characteristics and reaction of the current output in case of fault.
The default setting is output characteristics 4 ... 20 mA, fault mode
< 3.6 mA.
In the menu item "Current output Min./Max.", you determine the reac-
tion of the current output during operation.