Westfalia 321 765 300 107 Notice De Montage Et D'utilisation page 22

Check operation
28. Re-connect the earth for the vehicle battery.
29. The factory-fitted Gateway must be encoded for the "towing hitch" function expansion using a
VAS tester as follows:
•
19 Diagnosis interface for data bus
o 009 Encoding
30. The factory-fitted BCM1 must be encoded for the "towing hitch" function expansion using a
VAS tester as follows:
•
09 Electronic central electrics
o 008 Encoding
31. The factory-fitted BCM2 must be encoded for the "towing hitch" function expansion using a
VAS tester as follows:
•
46 Central Module Comfort System
o 008 Encoding
32. For vehicles fitted with parking assistance II or parking steering assistant, encode the control
unit using the VAS tester via self-diagnostics:
•
Address word 10 (parking assistant or parking steering assistant)
o 009 Encoding
22
Master
•
009 03 Encode fitting list
o 69 Trailer function (encoding)
Change the code value: Byte 18 Bit 5 to 1
Bit sample XX1XXXXX (X: enter the available values in the entry field). To
do this, switch to entry mode [BIN].
Change the code value: Byte 1 Bit 7 to 1
Bit sample 1XXXXXXX (X: enter the available values in the entry field). To
do this, switch to entry mode [BIN].
Change the code value: Byte 12 Bit 5 to 1
Bit sample XX1XXXXX (X: enter the available values in the entry field). To
do this, switch to entry mode [BIN].
Master
•
009 02 Plain text encoding
o Trailer
321 765 391 101 - 007 - 34/14
Electrical System for Towing Hitch
Towing hitch, detachable
VW Touareg NF, Porsche Cayenne E2
Installation Instructions: