• Do not put food in the oven when the
Fast heat up function operates.
• The Fast heat up is not available with
every oven function. An acoustic signal
sounds if the Fast heat up is not availa-
ble for the set function if Faulty tone is
activated in the "Settings menu".
6.5 Energy saving
The appliance contains fea-
tures which help you save en-
ergy during everyday cooking:
• Residual heat:
7. CLOCK FUNCTIONS
SYMBOL
7.1 Count Up Timer
Use the Count Up Timer to monitor how
long the appliance operates. It is on im-
mediately when the appliance starts to
heat.
Reset the Count Up Timer: touch
and
shows "00:00" and the Count Up Timer
starts to count up again.
You cannot use the Count Up
Timer when Duration or End is
set.
– When the heating function or
programme operates, the
heating elements are deacti-
vated 10% earlier (the lamp
and fan continue to operate).
For this feature to operate,
the cooking time must be
longer than 30 minutes or
you must use the clock func-
FUNCTION
TIME OF DAY
DURATION
END
at the same time until the display
• Cooking with the lamp off -
• Deactivating the display - If
• Eco functions - refer to "Oven
DESCRIPTION
To examine the time of day. For changing the
time of day refer to 'Setting and changing the
To set how long the appliance operates.
To set when the appliance deactivates. You can
use the Duration and End functions at the same
time (Time delay), if the appliance is to be acti-
vated and deactivated automatically later.
7.2 Setting the DURATION
1.
Activate the appliance and set an
oven function and temperature.
2.
Touch
display shows
display.
3.
Use
DURATION.
4.
Touch
5.
Use
DURATION.
ENGLISH
tions (Duration, End, Time
delay). This feature does not
operate with the grill func-
tions.
– When the appliance is off,
you can use the heat to keep
food warm. The clock / resid-
ual heat display shows the re-
maining temperature, and the
bars show the temperature
as it decreases.
Touch
to deactivate the
lamp during cooking.
necessary, you can fully deacti-
vate the display. Touch
at the same time until the
display goes out. This step also
activates the display.
functions".
time'.
again and again until the
.
flashes in the
or
to set the minutes for
to confirm.
or
to set the hours for
11
and