Initial Start-Up - SilverCrest SKM 500 B1 Mode D'emploi

WARNING! RISK OF INJURY!
Caution: the cutting knife, the cutting, shredding and grating discs
►
and the mixing knife are extremely sharp! For this reason, take
care when cleaning.
Caution: the cutting knife, the cutting, shredding and grating discs
►
and the mixing knife are extremely sharp! For this reason, take
care when emptying the mixing bowl and the blender.
When the appliance is operating, do not put anything other
►
than the ingredients to be processed into the mixing bowl or the
blender.
Do not put hands and foreign objects in the to filling shaft or the
►
mixer to avoid the risk of injury or damage to the appliance.
Do not change accessories unless the drive is stationary and the
►
mixer is unplugged from the power supply! The appliance will run
on for a short time after being switched off!
Never leave the appliance unattended!
►
Before changing accessories or additional parts that are in mo-
►
tion during operation, the appliance must be switched off and
disconnected from mains power.
CAUTION - PROPERTY DAMAGE!
Never fill the blender with boiling fluids, such as soup! Allow
►
these to cool until lukewarm.

Initial start-up

■ Clean the appliance as described in the chapter "Cleaning and Care".
■ Place the appliance on a flat and clean surface.
■ Attach the appliance to the subsurface with the suction cups so that it is fixed.
■ Unwind the power cord from the cord storage
cable lead through.
■ Assemble the appliance as described in the chapter entitled "Assembly"
depending on the type of use.
SKM 500 B1
and then attach it to the
GB
103